ABM International, Inc. Series: 1018/1022/1026/1032 V1.0
Model: Innova Longarm Quilting Machine Sequin
Proprietary information of ABM INTERNATIONAL, Inc. furnished for customer use only.
No other uses are authorized without the prior written permission of
ABM INTERNATIONAL, INC.
14
Step 3: Push the channel guide from the right side of the mechanism out the left side with another small tool.
Step 4: Select the correct channel guide and re-insert it into the mechanism with the correct channel facing up and
the finger slot facing towards the knife guide. Make sure the channel guide is pushed completely up against the
knife. Tighten the hold down screw and the knife guide screw.
Step 5: Remove the tools from the spring hold down and the finger.
3.2 Adjusting the Hard Stop
After the appropriate sequin channel guide has been installed in the mechanism, the hard stop must be adjusted
to set the correct cut point of the sequin.
Step 1: Install a string of the desired sequin into the channel guide from the left end, under the spring hold down
and finger and out past the knife.
Step 2: Make sure the finger is engaged in the center hole of a sequin and pushed tight against the hard stop.
Step 3: Visually inspect the location of the sequin that is exposed to the knife. If the sequin is not completely
visible or if more than one (but not two) are visible, the hard stop must be adjusted.
