ABM International, Inc. Series: 1018/1022/1026/1032 V1.0
Model: Innova Longarm Quilting Machine Sequin
Proprietary information of ABM INTERNATIONAL, Inc. furnished for customer use only.
No other uses are authorized without the prior written permission of
ABM INTERNATIONAL, INC.
18
Step 7: Touch the SEQUIN button.
Step 8: Set the sequin diameter value by touching the number on the screen and entering the correct value for the
sequin being used.
Step 9: Choose the mode of operation by touching the toggle switch on the screen.
The sequin attachment has three available modes:
NOTE: MODES CAN ONLY BE CHANGED WHEN THE MACHINE IS STOPPED AND NOT SEWING.
Single – When the machine is sewing, the attachment will dispense one sequin every time the white button is
pressed and released. The white button must be pressed and released to dispense the sequin – holding the white
button will not dispense a sequin.
Continuous – When the machine is sewing, the attachment will dispense a sequin on every other stitch when the
white button is pressed and held. Releasing the white button stops the dispensing of sequins.
Overlapping – When the machine is sewing, the attachment will dispense a sequin on every stitch when the white
button is pressed and held. Releasing the white button stops the dispensing of sequins.
Step 10: Return to the MAIN screen by touching the MAIN button.
Step 11: Enable the sequin attachment by touching the toggle switch on the screen so that it points to SEQUIN.
Step 12: Press the green button on the Innova handle bar to start sewing. Either press and release or press and
hold the white button on the handle bar to dispense sequins as desired.
