20
Impulse inputs
The closing contact drive (NO) must be potential free. The impulse device, like a
push button or motion sensor, must be installed within direct sight of the door.
Maximum length of the impulse device cable is 30 meters. The total resistance of
the control switch and its wiring must not exceed 100 ohm, when switch is closed.
Delayed impulse: delay = 1,0 seconds. When the operator receives the opening
impulse, the lock is released immediately and door is opened after 1,0 seconds.
Normal impulse: Door is opened immediately.
EXTERNAL CONNECTIONS
- Do not strip any cables for unnecessary length.
Loose wires may cause unwanted contacts.
All manuals and user guides at all-guides.com
