Introduction to the POLEMH6 –
Identification of the POLEMH6 |
11
Introduction to the POLEMH6
Thank you very much for choosing the POLEMH6 mounting pole from ABL!
The POLEMH6 is designed for the outdoor installation of up to two ABL eMH3 Wallboxes. The internal small distribu-
tion box with terminal block provides protection against contact and weather and allows virtually maintenance-free
wiring of the wallbox(es) to the electricity grid. Thanks to additional top-hat rails, further modules (such as lightning
protection) can be installed as required. Access is via a housing cover that protects the interior of the mounting pole
from unauthorised access by means of an integrated lock.
Thanks to the powder-coated metal housing, the POLEMH6 is optimally protected against corrosion and, with hous-
ing impermeability in accordance with IP44, it is ideal for outdoor installation. To ensure a stable and secure posi-
tion outdoors, ABL recommends installing on the optionally available EMH9996 concrete foundation. Alternatively, a
self-constructed foundation can be used, but it must meet the same specifications.
Further information on technical data is available in the appendix from page 28.
Identification of the POLEMH6
There is a rating plate on the inside right of the rear panel to identify the
POLEMH6. Before installation, open the housing cover and check the rating
plate to make sure that the model you have is the mounting pole intended
for your eMH3 Wallbox.
You can find further information on the POLEMH6 in section “Technical spec-
Items supplied
The product is delivered including the following components:
POLEMH6 mounting pole, 1 piece
Key for unlocking the housing cover,
3 pieces
Download note (multilingual), 1
piece
Zubehör
Download-Hinweis, Stand 10/2019
Produktnummer: 0301431_b
Die ausführlichen Installations- und
Bedienungsanleitungen stehen als
Download unter
www.ablmobility.de
bereit.
The detailed installation and operating
manuals are available for download at
www.ablmobility.de
.
DE
EN
ABL_Downloadhinweis-Anleitung_01.indd 1
21.10.19 17:03
M8×25 rounded-head screw, hexagon
socket with flange, 8 pieces
When delivered, the inlets for the supply and data cables as well as the thread points for fastening the wallbox, the
weather shield and the cable holders are also fitted with suitable blind plugs.
NOTE
Checking the components included
Check immediately after unpacking whether all components are included: should any components be missing,
please contact the dealer from whom you purchased the POLEMH6.
WARNING!
Storing the original packaging
Keep the original packaging in a safe place. In the event of damage that cannot be repaired on site, the mount-
ing pole may have to be dismantled and sent in for repair. The following requirements must be met for proper
shipping:
The mounting pole must be protected from mechanical damage during transport by means of the original
packaging or other equivalent packaging.
To ensure safe shipping, fixed transport on a pallet is recommended.
POLEMH6
230/400V 50Hz 63A
IP65
IEC 61439-3
MADE IN GERMANY
POLEMH6
ABL SURSUM
Bayrische Elektrozubehör GmbH & Co. KG
Albert-Büttner-Straße 11
D-91207 Lauf / Pegnitz