|
Appendix
30
Model code
METERS
METERL
Cable type current converter
IP rating
IP20
Operating temperature
-20 to 65°C
-20 to 50°C
Ambient temperature (storage)
-25 to 80°C
Cable type current converter
dimensions
65.5 × 46 × 35 mm
84 × 57 × 39 mm
Secondary output
UL R/C cable, 16 AWG (1.3 mm²)
Cable diameter
24 mm
36 mm
Cable length
0.5 m
1 m
Primary/secondary power
300 / 5 A
600 / 5 A
Frequency
50 / 60 Hz
Nominal insulation level
0.72 kV ac, dielectric strength 3 kV ac for 1 minute
Insulation class
Thermal class B (IEC 60085)
Accuracy (EN61869-2)
Class 1
Burden
2.5 VA
10 VA
IP rating
IP rating
Explanation
IP20
Protection against penetration of solid foreign bodies with a diameter greater
than 12.5 mm
IP40
Protection against penetration of solid foreign bodies with a diameter greater
than 1 mm
Data cable recommendations
The following data cables are recommended for wiring up the RS485 interfaces of the energy meter to the charging
station:
Designation
Cross section
Number
Cat5e
from at least 0.14 mm²
1 cable per connection
between two wallboxes
Cat6
from at least 0.14 mm²
WARNING!
Selecting suitable data cables
Please note that these are recommendations only: the conductor cross-section must be adjusted according to the
cable length by the specialist electrical contractor responsible for installation.