Wallbox eMH3 –
Intended use |
21
English
Intended use
Our Wallbox eMH3 is the ideal solution for group installations in company or hotel carparks. Available
with one (Single) or two (Twin) charge points, and as a stand-alone or Master/Slave variant. You can also
choose between versions with charging cable or charging socket. The Wallbox eMH3 is also available
as a bundle with backend solutions by reev, which offer an intuitive interface for the administration and
invoicing of all charging operations.
NOTE
Configuration options
You can find further information about configuration and operation of the Wallbox eMH3 in stand-alone
mode, as part of a group installation, and with a backend in the comprehensive
installation manual
(see “Additional technical information” on page 30).
Installation and operating information
This document describes the basics of operating your Wallbox eMH3.
Before you can use your Wallbox eMH3, it must be installed and taken into operation by a qualified
specialist electrical contractor: The installation is described in a separate
installation manual
, which is
available in digital format (PDF) from the
www.ablmobility.de
website (see also “Additional technical
User
Specialist electrical
contractor
Operating manual (this document)
Additional technical information
Data sheets
Installation manual
Safety information
Danger
Dangerous electrical currents
The violation or non-observance of the safety information contained in this manual may lead to electric
shock, fire, severe injury and/or death.
Please read all safety information carefully.
Always follow all safety notices provided!
Please pay attention to the following points:
Please read this manual carefully.
Heed all warnings and follow all instructions.
Keep this manual in a safe place where it can be accessed at all times: The contents of this manual,
and the safety notices in particular, must be available to all users of the product.
English
