manualshive.com logo in svg

ABL eMC2, Руководство пользователя, Страница: 36 / 44

Поделиться
Скачать
ABL eMC2 Скачать руководство пользователя страница 36

AppENdIx

32

Standard

Description

2002/96/EC

WEEE Guideline

ElektroG

Electrical and Electronic Device Statute

Device safety standards

Standard

Description

IEC 61851-1 Ed 2 0:2010

Conductive charging systems for electric vehicles – 

Part 1: General requirements

IEC 61851-22 (69/201/CD) 

Conductive charging systems for electric vehicles – 

Part 22: AC charging poles for electric vehicles

DIN EN 61851-1: 2012-01

Conductive charging systems for electric vehicles – 

Part 1: General requirements

E DIN EN 61851-22:2011-04

Conductive charging systems for electric vehicles – 

Part 22: AC charging poles for electric vehicles

HD 60364-7-722:2012

Low voltage installations –  

Part 7-722: Power supply for electric vehicles

Classes of protection & Degrees of protection

Class of protection / 
Degree of protection

Description

Class of protection I: All electrically conducting parts of the 

device are connected at low resistance with the protective 

earth system of the fixed installation

IP 44

Degree of protection of the device (protection against the 

intrusion of solid particles more than 1 mm in diameter and 

against splashing water)

IP 54

Degree of protection of the energy meter (protection 

against touch, dust in harmful quantities and protection 

from splashing water)

Trademarks

All trademarks mentioned in this manual including those that may be protected by 

third parties are, without restriction, subject to the regulations of the respectively ap-

plicable trademark law and the property rights of the respective registered owners. 

All trademarks, trading names or company names marked here as such are or may be 

trademarks or registered trademarks of their respective owners. All rights not explic-

itly granted here are reserved.

Содержание eMC2













































Отзывы:

Нет отзывов