ABL eMC2, Руководство пользователя, Страница: 31 / 44

RESOLVINg ERRORS
27
Operating status (RFID module)
The two central LED indicators also display the current operating status of the internal
RFID Module of the charging pole. To indicate certain operating states, the LEDs may...
• ...be illuminated (continuous ON)
• ...flash
• ... be extinguished (continuous OFF).
During normal operation, the following operating states are shown:
DESCRIPTION
flashes
every 5 seconds
OFF
The RFID module is ready for use, a charging process may
be requested at any time using an authorized transponder
(access card).
flashes
for no more
than
15 sec.
OFF
The RFID module has read the transponder data and initi-
ated authentication.
illuminated
for 1 sec.
OFF
Authentication of the transponder was successful, access
to the charging process is being granted.
OFF
illuminated
for 1 sec.
Authentication of the transponder was NOT successful,
access to the charging process is NOT being granted.
PLEASE NOTE:
Should the RFID module of the eMC2 refuse authentication of the
charging process, this indicates an error within the user data: In this
case, please contact the provider of the user platform.
Error codes for RFID module operation
Under some circumstances, malfunctions and disruptions may occur during or after
individual user login at the RFID module that prevent the proper charging of the vehicle
according to IEC 61851.1, Mode 3. The eMC2 independently detects any errors during
user registration and transmits these as feedback to the user portal via the back end
device: In case of an error, please contact the operator of your user platform.
To represent certain errors, the indicator LEDs will flash in a specific pattern that re-
peats until the error has been resolved.