ABL eMC2, Руководство пользователя, Страница: 30 / 44

RESOLVINg ERRORS
26
Resolving errors
Your eMC2 charging pole is engineered for maximum operational safety and the high-
est possible charging reliability. Internal testing algorithms detect any malfunction of
the eMC2 and switch the charging pole off immediately.
Should a malfunction occur in practice, an error code will be shown by the indicator
LEDs on the housing and/or the LEDs on the RFID module. The following chapter
describes how you recognize operating states as well as error codes and which mea-
sures you must take to resolve them.
Operating states
The LED status indicators of the charging pole indicate the current operating status. To
indicate certain operating states, the LEDs may...
• ...be illuminated (continuous ON)
• ... be extinguished (continuous OFF).
During normal operation, the following colors and states of illumination are displayed
by the LEDs:
Description
illuminated OFF
The charging station is ready for operation, the vehicle may
be connected for charging at any time.
OFF illuminated The vehicle is currently being charged.
PLEASE NOTE:
The charging process is always terminated by the vehicle, not by the
charging station. The
eMC2
only indicates that you can unplug the
charging cable from the vehicle charging socket on the basis of commu-
nication with the vehicle. Should the vehicle not be charged sufficiently
at this point, please contact your service partner for the vehicle.
In some circumstances, malfunctions and disruptions may occur that prevent the
proper charging of the vehicle according to IEC 61851.1, Mode 3. The eMC2 detects
any faults occurring on the part of the vehicle and displays them via the LED indicators
that are located centrally inside the housing or as part of the RFID module (if present)
of the charging pole.