ABK i-Cooking, Руководство по установке

Страница: 11 / 12

EN 10 Installation instruction
between the bolts for a correct fitting
of the pan support.
tip: To achieve a proper sealing of the O-
ring to the worktop, the disk has a slight
tension in it self.
example Standard burner
2.10 Installation of the knobs and
indicator plate. Remove the paper from
the sticker under the indicator ring, press
it, in the correct position, on to the
under-ring and finally attach the knob.
Tip: First place and turn the knob in both
directions to verify the correct position of
the indicator ring.
2.8 Place the pan supports over the
disks. The heads of the bolts function as
cams for a correct fitting.
Tip: The fingers of the pan supports must
be alligned 100% vertically and
horizontally.
2.9 Place the remaining burner
components. Pay attention to the fitting
2.11 Connect the gas hose to the
pins and cut outs in the components. appliance and plug the power plug into
the power socket. Finally, check the
ignition of the burners and if the work in
highest and lowest capcity.
Notes
EN 11 Notes