Abit ZH6, Руководство пользователя

Страница: 39 / 84

Introduction of the BIOS 3-13
User’s Manual
Boot Up Floppy Seek:
When the computer boots up, the BIOS detects if the system has an FDD or not. When this
item is enabled, if the BIOS detects no floppy drive, it will display a floppy disk drive error
message. If this item is disabled, the BIOS will skip this test.
Boot Up NumLock Status:
➤ On: At boot up, the Numeric Keypad is in numeric mode.
➤ Off: At boot up, the Numeric Keypad is in cursor control mode.
IDE HDD Block Mode:
This item can be set as Enable or Disable.
Most of new hard disk drives (IDE drives) support multi-sector transfers. This feature
speeds up hard disk drive access performance and reduces the time necessary to access data.
When this item is enabled, the BIOS will automatically detect if your hard disk drive
supports this feature or not, and will choose the right settings for you. (
The default is
Disable )
Typematic Rate Setting:
This item allows you to adjust the keystroke repeat rate. When enabled, you can set the two
keyboard typematic controls that follow (Typematic Rate and Typematic Rate Delay). If this
item is disabled, the BIOS will use the default setting.
Typematic Rate (Chars/Sec):
When you press a key continuously, the keyboard will repeat the keystroke according to the
rate you have set. (Unit: characters/second
）
Typematic Rate Delay (Msec):
When you press a key continuously, if you exceed the delay you have set here, the keyboard
will automatically repeat the keystroke according to a certain rate. (Unit: milliseconds)
Security Option:
This option can be set to System or to Setup .