Abit KG7, Руководство пользователя

Страница: 55 / 104

Introducing the BIOS
User’s Manual
3-27
There are three options for power management:
!
User Define: “User Define” defines the delay for accessing the power modes.
"
Standby Mode:
Disabled
)
30 Sec
)
1 Min
)
4 Min
)
10 Min
)
20 Min
)
30 Min
)
1 Hour. The default
setting is Disabled .
"
HDD Power Down:
Disabled
)
1 Min
)
2 Min
)
3 Min
)
4 Min
)
5 Min
)
6 Min
)
7 Min
)
8 Min
)
9 Min
)
10 Min
)
11 Min
)
12 Min
)
13 Min
)
14 Min
)
15 Min. The default setting is
Disabled .
When the two saving modes are enabled, the system is set up for minimum or maximum power
savings.
!
Min Saving:
Standby Mode: 1 Hour
HDD Power Down = 15 Min
!
Max Saving:
Standby Mode: 30 Sec
HDD Power Down = 1 Min
Video Off Method:
Three video off methods are available: “Blank Screen”, “V/H SYNC + Blank” and “DPMS Support”. The
default is
V/H SYNC + Blank .
If this setting does not shut off the screen, select “Blank Screen”. If your monitor and video card support
DMPS standard, select “DPMS Support”.
Soft-Off by PBTN:
Two items available: Delay 4 Sec or Instant-Off. The default setting is Instant-Off . It is activated when
the user presses the power button for more than four seconds while the system is in the working state,
then the system will transition to the soft-off (Power off by software). This is called the power button
over-ride.
Wake-Up by PCI card (PME):
Two items are available: Disabled or Enabled. The default setting is Disabled . When set to Enabled , any
event occurring to the PCI card will awaken a system that has powered down.
PowerOn by Ring/Lan:
Two items are available: Disabled or Enabled. The default setting is Disabled . When set to Enabled , any
event occurring to the LAN or modem ring will awaken a system that has powered down.
Modem Use IRQ:
Eight items available: NA
)
3
)
4
)
5
)
7
)
9
)
10
)
11
)
Back to NA. The default setting is NA .
You can specify the IRQ for modem use.