background image

Hardware Setup

 

 

IP35 Pro 

1-9 

 

5.  Use your left hand to hold the load plate, 
and use your right thumb to peel the cap off. 
 

The cap plays an important role in 
protecting contact pins. In order to 
prevent bent pin, PUT ON the cap after 
operation or testing.

 

 

6.  Lower the plate onto the CPU package. 
Engage the load lever while gently pressing 
down the load plate. 

 

7.  Secure the lever with the hook under 
retention tab. 

 

8.  Place the heatsink and fan assembly onto 
the socket. Align the four fasteners toward 
the four mounting holes on the motherboard. 

 

9.  Press each of the four fasteners down 
into the mounting holes. Rotate the fastener 
clock-wise to lock the heatsink and fan 

assembly into position. 

 

10. Attach the four-pin power plug from the 

heatsink and fan assembly to the CPU FAN 
connector. 

 

※ 

A higher fan speed will be helpful for better airflow and heat-dissipation. 
Nevertheless, stay alert to not touch any heatsink since a high temperature 
generated by the working system is still possible. 

Содержание IP35

























































































Отзывы: