Abit IP35, Руководство пользователя

Страница: 47 / 88

BIOS Setup
IP35 Pro 2-21
2.6 Power Management Setup
Phoenix – AwardBIOS CMOS Setup Utility
Power Management Setup
ACPI Suspend Type S3(Suspend-To-RAM) Item Help
- Resume by USB from S3 Enabled
Power Button Function Instant-Off
Wake Up by WAKE# of PCIe Disabled
Wake Up by PME# of PCI Disabled
Wake Up by Onboard LAN1 Disabled
Wake Up by Onboard LAN2 Disabled
Resume by Alarm Disabled
x - Date(of month) Alarm 0
x - Time(hh:mm:ss) Alarm 0 : 0 : 0
POWER ON Function Button Only
x - KB Power ON Password Enter
x - Hot Key Power ON Ctrl-F1
Restore On AC Power Loss Power Off
‚€ :Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
ACPI Suspend Type
This item selects the type of Suspend mode.
- Resume by USB from S3
When set to [Enabled], this item allows you to use a USB device to wake up a system that is in
the S3 (STR - Suspend To RAM) state. This item can be configured only if the item “ACPI
Suspend Type” is set to [S3(STR)].
Power Button Function
This item selects the method of powering off your system:
[Delay 4 Sec.]: Pushing the power button for more than 4 seconds will power off the system.
This will prevent the system from powering off in case you accidentally hit or pushed the power
button.
[Instant-Off]: Pressing and then releasing the power button at once will immediately power
off the system.
Wake Up by WAKE# of PCIe
When set to [Enabled], access through the add-on PCI Express card can remotely wake up the
system that was in Soft-Off condition. The PCI Express card must support the wake up function.
Wake Up by PME# of PCI
When set to [Enabled], access through the add-on PCI card can remotely wake up the system
that was in Soft-Off condition. The PCI card must support the wake up function.
Wake Up by Onboard LAN1/LAN2
When set to [Enabled], access through the onboard LAN1/LAN2 port can remotely wake up the
system that was in Soft-Off condition.