manualshive.com logo in svg

Abit IC7-MAX3, Руководство пользователя

Поделиться
Скачать
Abit IC7-MAX3 Скачать руководство пользователя страница 48

3-6 

Chapter 3 

[EGA/VGA]:

 (Enhanced Graphics Adapter/Video Graphics Array) For EGA, VGA, SVGA and PGA 

monitor adapters. 

[CGA 40]:

 (Color Graphics Adapter) Power up in 40-column mode. 

[CGA 80]:

 (Color Graphics Adapter) Power up in 80-column mode. 

[Mono]:

 (Monochrome adapter) Includes high-resolution monochrome adapters. 

Halt On: 

This item determines whether the system stops if an error is detected during system boot-up. 

[All Errors]:

 The system-boot will stop whenever the BIOS detect a non-fatal error. 

[No Errors]:

 The system-boot will not stop for any error detected. 

[All, But Keyboard]:

 The system-boot will stop for all errors except a keyboard error. 

[All, But Diskette]:

 The system-boot will stop for all errors except a diskette error. 

[All, But Disk/Key]:

 The system-boot will stop for all errors except a diskette or keyboard error. 

Base Memory: 

This item displays the amount of base memory installed in the system. The value of the base memory is 
typically 640K for system with 640K or more memory size installed on the motherboard. 

Extended Memory: 

This item displays the amount of extended memory detected during system boot-up. 

Total Memory: 

This item displays the total memory available in the system. 

IC7-MAX3 

Содержание IC7-MAX3

































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды