manualshive.com logo in svg

Abit IC7-MAX3, Руководство пользователя

Поделиться
Скачать
Abit IC7-MAX3 Скачать руководство пользователя страница 41

Hardware Setup 

2-19 

(16).  Back Panel Connectors 

 

• 

Mouse: 

Connects to PS/2 mouse. 

• 

Keyboard: 

Connects to PS/2 keyboard. 

• 

OPT-IN1: 

This connector provides an S/PDIF in connection through optical fiber to digital 

multimedia devices. 

• 

OPT-OUT1:

 This connector provides an S/PDIF out connection through optical fiber to digital 

multimedia devices. 

• 

AUDIO1: 
R.L./R.R. (Rear Left / Rear Right):

 Connects to the rear left and rear right channel in the 5.1 

channel audio system. 

Cen./Sub. (Center / Subwoofer):

 Connects to the center and subwoofer channel in the 5.1 channel 

audio system. 

• 

AUDIO2: 
Mic In: 

Connects to the plug from external microphone. 

Line In: 

Connects to the line out from external audio sources. 

F.L./F.R. (Front Left / Front Right):

 Connects to the front left and front right channel in the 

5.1-channel or regular 2-channel audio system. 

• 

IEEE1394: 

Connects to devices of IEEE1394 protocol. 

• 

LAN: 

Connects to Local Area Network. 

• 

USB1/USB2: 

Connects to USB devices such as scanner, digital speakers, monitor, mouse, 

keyboard, hub, digital camera, joystick etc. 

User’s Manual 

Содержание IC7-MAX3

































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды