3-12 Chapter3
BF6
number of read/write heads. The minimum number you can enter is 0, the maximum number
you can enter is 255.
+
Precomp:
The minimum number you can enter is 0, the maximum number you can enter is 65536.
Warning
Setting a value of 65536 means no hard disk exists.
+
Landing Zone:
This is a non-data area on the disk's inner cylinder where the heads can rest when the power
is turned off. The minimum number you can enter is 0, the maximum number you can enter
is 65536.
+
Sector:
The minimum segment of track length that can be assigned to stored data. Sectors usually
are grouped into blocks or logical blocks that function as the smallest units of data permit.
You can configure this item to sectors per track. The minimum number you can enter is 0,
the maximum number you can enter is 255.
Driver A & Driver B:
If you have installed the floppy disk drive here, then you can select the type of floppy drive
it can support. Six options are available: None
,
360K, 5.25 in.
,
1.2M, 5.25in.
,
720K,
3.5 in.
,
1.44M, 3.5 in.
,
2.88M, 3.5 in.
Floppy 3 Mode Support:
Four options are available: Disabled
,
Driver A
,
Driver B
,
Both. The default setting is
Disabled
. 3 Mode floppy disk drives (FDD) are 3 1/2” drives used in Japanese computer
systems. If you need to access data stored in this kind of floppy, you must select this mode,
and of course you must have a 3 Mode floppy drive.
Video:
You can select the VGA modes for your video adapter, four options are available:
EGA/VGA
,
CGA 40
,
CGA 80
,
MONO. The default setting is EGA/VGA.
Содержание AB-BF6
