background image

How to Get Technical Support 

I-3 

North America and South America:

 

 

ABIT Computer (U.S.A.) Corporation 

45531 Northport Loop West, 
Fremont, California 94538, U.S.A. 
Tel: 1-510-623-0500 
Fax: 1-510-623-1092 
[email protected] 
[email protected] 
http://www.abit-usa.com

 

U.K. and Ireland: 

ABIT Computer (U.K.) Corporation 
Ltd. 

Unit 3, 24-26 Boulton Road, 
Stevenage, Herts SG1 4QX, U.K. 
Tel: 44-1438-228888 
Fax: 44-1438-226333 
[email protected] 
[email protected]

 

Germany, Benelux (Belgium, 
Netherlands, Luxembourg), Denmark, 
Norway, Sweden, Finland, and 
Switzerland: 

AMOR Computer B.V. (ABIT’s 
European Office) 

Van Coehoornstraat 7, 
5916 PH Venlo, The Netherlands 
Tel: 31-77-3204428 
Fax: 31-77-3204420 
[email protected] 
[email protected] 
http://www.abit.nl

 

Austria, Czech, Romania, Bulgaria, 
Yugoslavia, Slovakia, Slovenia, Croatia, 
Bosnia, Serbia, and Macedonia: 

Asguard Computer Ges.m.b.H 

Schmalbachstrasse 5, 
A-2201 Gerasdorf/Wien, Austria 
Tel: 43-1-7346709 
Fax: 43-1-7346713 
[email protected]

 

Japan: 

ABIT Computer (Japan) Co. Ltd. 

Fax: 81-3-5396-5110 
http://www.abit4u.jp

 

Shanghai: 

ABIT Computer (Shanghai) Co. Ltd. 

Tel: 86-21-6235-1829 
Fax: 86-21-6235-1832 
http://www.abit.com.cn

 

Russia: 

ABIT Computer (Russia) Co. Ltd. 

Fax: 7-095-937-2837 
[email protected] 
http://www.abit.ru

 

France, Italy, Spain, Portugal, and 
Greece: 

ABIT Computer France SARL 

Tel: 33-1-5858-0043 
Fax: 33-1-5858-0047 
http://www.abit.fr

 

All other territories not covered above 
please contact Taiwan Head Office: 

When contacting our headquarters please 
Note we are located in Taiwan and we are 
8+ GMT time. In addition, we have 
holidays that may be different from those 
in your country. 

ABIT Computer Corporation 

No.323, Yang Guang St., Neihu, Taipei, 
114, Taiwan 
Tel: 886-2-8751-8888 
Fax: 886-2-8751-3382 
[email protected] 
[email protected] 
[email protected] 
http://www.abit.com.tw

 

User’s Manual 

Содержание AB-AI7

































































































Отзывы: