33
Setting the channel range
Your Control 18 has the option to set different channel ranges for the transmitter to operate
within. When the change of channel range is applied, programmed channels will disappear
and a new random code is added on the
Code
-button
!
.
Normally, the channel range does not need to be changed. If several GewaLink transmitters
are to be used in the same area and you do NOT want to control the same equipment, it
may be necessary to use different channel ranges.
Table 2 shows the different settings.
Table 2: Channel range
Channel range,
GewaLink channels
00-79
1
64-127
2
Level 1
00-15
64-79
Level 2
16-31
80-95
Level 3
32-47
96-111
Level 4
1
48-63
112-127
Level 5
64-79
1
62-62
1
Channel 62 is a stop code and cannot control any function. On the other hand you can store channels/codes
on this button which in turn can control a function.
Do as follows to set the channel range:
1. Press
P
and
---
at the same time. The indication lamp for the
Level
-button and the
current level are now lit.
2. Press
!
.
3. Choose channel range
1
or
2
according to table 2 above.
4. The lights for levels 1-5 flashes red in turn. Then the light for the
Level
-button flashes
green to indicate that the operation is complete.
Setting the channel range
Press
P
+
---
,
!
,
choose the channel range.
1
= 00-79,
2
= 64-127
Default setting: GewaLink channel 00-79
