Abicor Binzel ROBO Compact W600, Инструкция по эксплуатации

Страница: 35 / 156

BAL.0374.0 • 2019-04-01 EN - 9
ROBO Compact W600 4 Scope of delivery
4 Scope of delivery
The welding torches in this series come as entire units ready for welding, i.e. with the standard
wear parts, cable assembly and Euro-ZA or RPC. Check whether you have selected the correct
equipment parts for initial assembly.
The ROBO cable assembly does not make the ROBO welding torch fully functional. Additional,
welding-task-dependent components are also required for the initial set-up. These include the
following:
To increase the system availability of the welding robot, ABICOR BINZEL offers automated
torch cleaning (BRS, TCS) and gas saving units (EWR).
Order the equipment parts and wear parts separately.
The order data and ID numbers for the equipment parts and wear parts can be found in the
current catalogue. Contact details for advice and orders can be found online at
www.binzel-
abicor.com .
4.1 Transport
Although the items delivered are carefully checked and packaged, it is not possible to fully
exclude the risk of transport damage.
• Welding torch • Cable assembly
• Cable support on the machine Euro-ZA or RPC • Operating instructions
Tab. 8 Scope of delivery
• Torch mount (required for attachment to the robot) • Wire brake
Tab. 9 Options
Goods inspection Use the delivery note to check that everything has been delivered.
Check the delivery for damage (visual inspection).
In case of
complaints If the delivery has been damaged during transport, contact the last
carrier immediately. Retain the packaging for potential inspection
by the carrier.
Packaging for
returns Where possible, use the original packaging and the original
packaging material. If you have questions concerning packaging
and safety during shipment, please consult your supplier, carrier or
transporter.
Tab. 10 Transport