Abicor Binzel ROBO Compact W600, Инструкция по эксплуатации

Страница: 36 / 156

EN - 10 BAL.0374.0 • 2019-04-01
5 Functional description ROBO Compact W600
4.2 Storage
Physical storage conditions in a closed environment:

Tab. 2 Ambient conditions for transport and storage on page EN-6
5 Functional description
The fully functional ROBO Compact W600 welding torch system is made up of the ROBO
welding torch and cable assembly components. Together, the components form a
fully-functional entity that provides an arc for welding when supplied with the appropriate
consumables. The welding wire required for welding is fed through the ROBO Compact W600
system all the way to the contact tip. The contact tip transmits the welding current to the welding
wire, producing an arc between the welding wire and the workpiece. The arc and the molten
pool are protected by the inert gas (MIG) and the active gas (MAG).
6 Putting into operation
DANGER
Risk of injury due to unexpected start
The following instructions must be adhered to during all maintenance, servicing, assembly,
disassembly and repair work:
• Switch off the power source.
• Close off the gas supply.
• Close off the coolant supply.
• Disconnect all electrical connections.
DANGER
Risk of injury and device damage when handled by unauthorized persons
Improper repair work and modifications to the product may lead to serious injuries and
damage to the device. The product warranty will be rendered invalid if work is carried out on
the product by unauthorized persons.
• Only qualified personnel are permitted to perform work on the device or system.