Abicor Binzel PP, Руководство по эксплуатации

Страница: 30 / 72

EN - 12 BAL.0212.0 • 2018-07-16
4 Putting into operation PP
4.6 Setting the shielding gas quantity
4.7 Feeding in the wire
1 Insert the wire in the wire feeder as specified by the manufacturer.
2 Remove clamping cap (2) from handle (6) .
3 Swing out seat clamp (7) laterally.
4 Press the "Current-less wire feed" trigger at the wire feed unit until the wire emerges from the
contact tip.
5 Lock seat clamp (7) and attach clamping cap (2) .
NOTICE
• The type and quantity of the shielding gas depends on the welding task and the gas
nozzle geometry.
• Make all shielding gas connections gas-tight.
• To prevent the shielding gas supply from becoming clogged by impurities, the cylinder
valve must be opened briefly before connecting the cylinder. This will expel any impurities
that may be present.
1 Torch neck
2 Clamping cap
3 Flat-head screw
4 Fixing plate
5 Potentiometer (optional)
6 Handle
7 Seat clamp
Fig. 6 Feeding in the wire
1 2
7 5 6
4
3
NOTICE
• Each time the wire is changed, make sure that the beginning of the wire is free of burrs.
• Make sure that the wire feed roll complies with the diameter of the inserted wire
electrode.

8.1 Replacing the wire feed roll on page EN-15