S100DL / S125DL
Thank you for purchasing Q.Light product. Please read this
manual carefully before installing this product for safe and long
use.
▪ Signal sound built-in product with long self-life of light source
by employing high-brightness LED and possible to transmit
both visual and auditory signal at same time.
▪ Excellent in diffusing signal light by employing unique direct-
diffusion system.
▪ Possible to select “steady light” or “flashing light” by using
built-in steady/flashing selection switch according to the
purpose of use.
▪ Material: Lens-AS, Body-ABS, Reflector-thermostable ABS
▪ Signal sound volume: MAX 105dB/m
▪ Flashes(Flashing Type): 60-80/Min.
▪ Protection Class: IP54
▪ Each model has 5 sound tones built-in. Select a suitable sound
tone for the purpose of use
▪
General Specification
Model
Rated
Voltage
Current
Weight
Flashes
Color
S100DL
DC12V
0.411A
0.97Kg
60~80/min.
RED-R
AMBER-A
GREEN-G
BLUE-B
DC24V
0.315A
0.97Kg
AC110V
0.114A
1.38Kg
AC220V
0.057A
1.38Kg
S125DL
DC12V
0.411A
0.92Kg
DC24V
0.315A
0.92Kg
AC110V
0.114A
1.31Kg
AC220V
0.057A
1.31Kg
▪ S100DL External View Drawing
S100DL
▪ S125DL External View Drawing
S125DL
Main Built-in
Sounds
CH
Sound Tone
DB(Max)
WS
5Warning
Sounds
ch1
ch2
ch3
ch4
ch5
Fire A-ANG Sound
Emergency WA-U Sound
Ambulance PI-PO Sound
Machinery Fault PI-PI Sound
High-Expasion Foamrelease PI~Sound
105dB
WM 5Melodies
ch1
ch2
ch3
ch4
ch5
Sweet Home
For Elise
Cuckoo Waltz
Piano Sonata
Turkish March
105dB
WA 5Alarms
ch1
ch2
ch3
ch4
ch5
Beep. intermittent
Door chime
Phone Ring sound
PI.PI.PI. short interval
Tripping bead sound
103dB
WV 3Voice Signals
Ch1
Ch2
Ch3
Voice recording 3 channels
95dB
This product has built-in the switch on the assembling board for
steady/flashing selection. Refer to the following drawing and
explanation for right operating.
1) Lens Removal
Remove lens① by turning it counterclockwise and make sure
Steady/Flashing Selecting switch on the assembling board②.
OPERATING MANUAL
LED Steady/Flashing Light with Phone
Sound Tone Combination of Standard Product
Selecting Steady/Flashing Type
