MasterLiner Maxi Flex/HD; Basic Flex/HD
EN - 11
6.1.1 Wire drum connection – feeding in the wire through an internal wire guide
1
Push the wire end through the internal wire guide.
2
Bend the wire end over by approx. 10 mm.
NOTICE
• Note the minimum passage size and the permissible wire dimensions for the various liner types.
Fig. 5
Advantages
suitable length to the wire drum cover.
Avoidance of contact
and the wire looping round
the wire drum’s components
Avoidance of
wire knots
Other advantages
We recommend attaching a wire guide of a
Advantage:
any dirt on the wire is removed in the wire inlet,
meaning that less dirt gets into the wire guide.
The internal wire guide can be detached if necessary and
cleaned.
NOTICE
• If the wire ends are not close fitting, the small passage size of the MasterLiner Basic may prevent the
wire from being fed in.
Fig. 6
Wire feed
