EN - 6
3 Product description
MasterLiner Maxi Flex/HD; Basic Flex/HD
3.1.1 Setup of the individual components
3.2 Suspension/total bending angle of all bending radii
Maxi Flex QC
Hose ø 34 mm
Largest ø 40 mm
Maxi Flex G1/4
Hose ø 34 mm
Largest ø 40 mm
MasterLiner HD
with QC quick connector and threaded connection
MasterLiner Flex
with QC quick connector and threaded connection
Tab. 5
MasterLiner connections
1
Fully assembled MasterLiner
2
Connection element
3
Wire guide element
4
Assembled freely rotatable wire
guide element
5
MasterLiner Maxi HD with
aramid outer jacket
6
MasterLiner Maxi Flex with PA
outer tube
Fig. 1
Setup of the individual components
1
2
3
4
5
6
CAUTION
Wire feed irregularities
Wire feed irregularities due to the lowest permissible bending radii being breached, too many bending
radii and wire feed distances exceeding 25 m.
• Please note the specifications with regard to the permissible bending angles, bending radii and
maximum lengths.
3.2 Suspension/total bending angle of all bending radii on page EN-6
• Use an additional drive in the event of wire feed distances of over 25 m.
