Abicor Binzel iROB Feed HA, Руководство по эксплуатации

Страница: 79 / 92

iROB Feed HA 13 Appendix
BAL.0737.0 • 2019-11-15
EN - 33
E48 Alarm for lack of wire
E49 Alarm for emergency switch Ensure safety and trigger the
emergency off switch.
E50 Alarm for stuck-on wire/burned-on
wire Loosen welding wire from seam.
E51 Alarm settings not supported
Operating mode not supported
Power source is in test mode.
Switch to MIG/MAG mode.
E52 Alarm for anti-collision Drive the welding torch out of
collision or deactivate the sensor
function in setup if no safety cut-out
device is used.
E53 Alarm for external gas flow
measurement
External coolant flow sensor
Optional external sensor. Check to
ensure proper function. If no sensor is
used, deactivate the function in setup.
E99 General alarm Perform a reset. Check the
configuration.
Alarm code Alarm symbol Alarm type Possible remedial action
Tab. 17 Alarm codes