Abicor Binzel iROB Feed HA, Руководство по эксплуатации

Страница: 68 / 92

EN - 22
BAL.0737.0 • 2019-11-15
10 Troubleshooting iROB Feed HA
10 Troubleshooting
Observe the attached “Warranty” document. In the event of any questions and/or problems, please contact your retailer or
the manufacturer.
DANGER
Risk of injury and device damage when handled by unauthorized persons
Improper repair work and modifications to the product may lead to serious injuries and damage to the device. The
product warranty will be rendered invalid if work is carried out on the product by unauthorized persons.
• Only qualified personnel are permitted to perform work on the device or system.
NOTICE
• For safety reasons, the side cover must be closed when welding.
NOTICE
• Consult the documentation for the welding components.
Fault Cause Troubleshooting
The system cannot
be switched on
(green LED is off).
• No mains voltage for socket. • Check the electrical system and repair as
needed.
• Plug or supply cable is defective. • Have the system repaired by the customer
service department.
• Mains fuse has blown. • Have the system repaired by the customer
service department.
• On/Off switch is defective. • Have the system repaired by the customer
service department.
• Electronics are defective.
• Have the system repaired by the customer
service department.
No power output
(system does not
perform welding
functions).
• Torch button is defective. • Have the system repaired by the customer
service department.
• System overheats (alarm for overheating =
yellow LED illuminates).
• Wait until the system cools down.
Do not switch off the system!
• Side cover is open or door switch is
defective.
• Have the system repaired by the customer
service department.
• Incorrect ground connection. • Establish a correct ground connection.

6 Commissioning on page EN-10
• Mains voltage outside of permissible
operating voltage (yellow LED illuminates).
• Connect system correctly.
• Bring the mains voltage into the range of the
permissible operating voltage.
• Electronics are defective. • Have the system repaired by the customer
service department.
Tab. 12 Troubleshooting