Abicor Binzel iROB Feed HA, Руководство по эксплуатации

Страница: 76 / 92

EN - 30
BAL.0737.0 • 2019-11-15
13 Appendix iROB Feed HA
500
Graphical interface for selecting the corresponding interface:
XE (Easy mode)
XA (Advanced mode)
XP (Professional mode)
Facilitates access to higher setup levels:
USER: User
SERV: Maintenance
BINZEL: Binzel
551
Lock/unlock for locking the control panel and for implementing a security code.
552
Volume of the acoustic warning device. The volume of the warning device is set here.
Min.: Off, Max.: 10, Standard: 10
553
Contrast (LCD 4.7“) for setting the screen contrast. Min.: −20; Max.: +20
601
Increment for controlling the increment that can be set by the user.
Min.: 1, max.: lmax, Standard: 1
602
External parameters CH1, CH2, CH3, CH4 for managing the external parameters
(minimum value, maximum value, standard value, selected parameter).
606
U/D torch for managing external parameters (CH1).
705
Calibration of welding circuit resistance for calibrating the system. Press the “Main
controller” button and establish electrical contact between the wire guide tip and the
welding piece. Press the “Torch” button for at least 1 second.
751
Power display shows the actual welding current.
752
Voltage display shows the actual welding voltage.
760
Motor power display shows the actual motor current.
801
Safety limit for setting the warning and safety limits. Facilitates precise control of the
various welding phases.
Parameter Symbol Meaning
Tab. 14 List of setup parameters for MIG/MAG welding and MIG pulse welding