EN - 26
10 Troubleshooting
ABIPLAS
®
WELD CT Plasma drive
1
Take off protective cap
and rotate clamp lever
upward.
2
Release locking and swivel out rocker
3
With the rocker
open, unscrew the knurled screws
4
Take off insulated driving rollers
, moving
them upward.
5
Unscrew the knurled screws
moving them
downward.
9.4 Replacing the liner on the cable assembly
6.7 Mounting the liner on page EN-16
10 Troubleshooting
1
2 knurled screws
2
2 knurled screws
3
2 pressure rollers
4
Rocker
5
Clamp lever
6
Stop
7
Stop nipple
8
Protective cap
9
2 axes
10
Toothed wheels
11
2 driving rollers
Fig. 15
Replacing the feed rolls
1
2
6
5
3
4
11
10
9
8
7
NOTE
• Some problems are listed below, with descriptions of possible causes
and solutions. If the measures described below are not successful, please
consult your dealer or the manufacturer.
• Please also consult the operating instructions for the welding
components, such as the power supply, welding torch system, re-
circulating cooling unit, etc.
Содержание ABIPLAS WELD CT
Страница 30: ...DE 30 12 Entsorgung ABIPLAS WELD CT Plasma Drive ...
Страница 58: ...EN 29 ABIPLAS WELD CT Plasma drive 12 Disposal ...
Страница 59: ...EN 30 12 Disposal ABIPLAS WELD CT Plasma drive ...