EN - 20
BAL.0092 • 2017-06-06
10 Troubleshooting
ABIPLAS
®
WELD
To sharpen the tungsten electrode, use a sharpening device with a diamond
wheel and the following functional principles:
• The point is sharpened longitudinally through the center axis.
• Automatic regulation of the tungsten electrode drive by gravity.
• Can be set for all electrode diameters.
• Offers continuous angle adjustment.
10 Troubleshooting
Please observe the attached ‘Warranty’ document. In the event of any doubts
and/or problems, please contact your retailer or the manufacturer.
Fig. 7
Sharpening the tungsten electrode
20°
DANGER
Risk of injury and device damage when handled by
unauthorised persons
Improper repair work and modifications to the product may lead to serious
injuries and damage to the device. The product warranty will be rendered
invalid if work is carried out on the product by unauthorised persons.
• Operating, maintenance, cleaning and repair work must only be carried
out by qualified personnel (in Germany, see TRBS 1203).
NOTICE
• Please also consult the operating instructions for the welding
components, such as the power source, welding torch system, coolant
recirculator etc.