BAL.0716.0 • 2022-01-11
EN
-
7
ABIPLAS
®
CUT HF
3 Product description
Standard values for cutting capacity
The specifications on the cutting capacity are standard values only as they are also greatly
affected by the following factors:
• Type and quality of the material
• Compressed air pressure and impurities
• Temperature of the workpiece to be cut
• Desired cutting quality
• Condition of the electrode and the cutting nozzle
• Distance and position of the cutting torch from/in relation to the workpiece
• Power source characteristics
• Cutting speed
Soft start air [l/min]
≥ 12
≥ 15
≥ 15
Gas post flow time [s]
≥ 60
Selection of the plasma
nozzle
0.9 mm / to 30 A
1.0 mm / 30–50 A
1.2 mm / to 70 A
1.1 mm / 30–60 A
1.2 mm / 40–70 A
1.5 mm / 70–90 A
1.2 mm / 50–70 A
1.4 mm / 70–90 A
1.6 mm / 90–120 A
1.6 mm / 90–110 A
1.8 mm / 120–150 A
1.1 mm long/max. 50 A 1.2 mm long/max. 50 A 1.2 mm long/max. 50 A
2.6 mm for gouging
3.0 mm for gouging
ABIPLAS
®
CUT
71 HF
71 HF MT
111 HF
111 HF MT
151 HF
151 HF MT
Tab. 3
Product-specific torch data (EN 60974-7)
ABIPLAS
®
CUT
71 HF
71 HF MT
111 HF
111 HF MT
151 HF
151 HF MT
Material thickness [mm]
Steel
20 (max. 25) at 70 A
35 (max. 40) at 110 A
50 (max. 55) at 150 A
13 (max. 15) at 50 A
30 (max. 35) at 90 A
35 (max. 45) at 120 A
Stainless steel
18 (max. 25) at 70 A
30 (max. 35) at 110 A
40 (max. 45) at 150 A
13 (max. 15) at 50 A
25 (max. 30) at 90 A
30 (max. 40) at 120 A
Aluminium
15 (max. 20) at 70 A
25 (max. 30) at 110 A
35 (max. 40) at 150 A
8 (max. 10) at 50 A
20 (max. 25) at 90 A
25 (max. 35) at 120 A
Tab. 4
Standard values for cutting capacity
