Abicor Binzel ABIMIG 452W, Руководство по эксплуатации

Страница: 24 / 64

EN - 8 BAL.0085 • 2017-03-02
5 Putting into operation ABIMIG
®
W
5.2 Attaching the wire guide
5.2.1 Liner

Fig. 2 Mounting on page EN-8
For using steel wires:
1 Stretch out the cable assembly (2) and unscrew the gas nozzle (9) and
contact tip (10) from the torch neck.
2 Unscrew the nut from the central connector and slide the liner (3) through
the wire conduit up to the retaining nipple.
3 Tighten the nut again by hand and cut off any excess liner (3) flush using
the side cutting pliers (7) on the torch neck or tip adaptor (8) .
4 Unscrew the nut and pull out the liner (3) .
5 Sharpen the start of the liner to an angle of approx. 40° and deburr the
edge.
1 Torch neck
2 Cable assembly
3
Liner
4 Cutter
5 PA liner
6
Sharpener
7 Side cutting pliers
8 Tip adaptor
9
Gas nozzle
10 Contact tip
Fig. 2 Mounting
3
2
3
4
1
6 7 5
9
10
8
NOTICE
• New still unused liners have to be shortened to the actual length of the
cable assembly.