Abicor Binzel ABI-CAR E-1200, Инструкция по эксплуатации

Страница: 59 / 68

ABI-CAR E-1200 / E-1200-O
BAL.0647.0 • 2018-08-24
EN - 27
9 Maintenance and cleaning
Scheduled maintenance and cleaning are prerequisites for a long service life and trouble-free operation.
WARNING
Risk of injury
Maintenance and repair work may be performed only by trained specialists who are particularly well trained and are
very familiar with the machine.
• In some cases, important safety devices do not function during service and maintenance work. Therefore, this type of
work requires particular caution.
• Electronic work may be performed only by a trained electrician.
• Maintenance must be performed only on machines that are switched off. Disconnect the machine from its power
supply (power source, welding power source) before performing any maintenance work.
• Ensure the machine cannot be switched on again.
• Always tighten any loose screw connections when performing maintenance and repair work.
DANGER
Risk of injury due to unexpected start
The following instructions must be adhered to during all maintenance, servicing, assembly, disassembly, and repair work:
• Switch off the power source.
• Switch off the control device.
• Switch off the entire welding system.
• Close off the gas supply.
• Disconnect all electrical connections.
DANGER
Electric shock
Dangerous voltage due to defective cables.
• Check all live cables and connections for proper installation and damage.
• Replace any damaged, deformed, or worn parts.
NOTICE
• The specified maintenance intervals are standard values and refer to single-shift operation.
• Maintenance and repairs may be carried out only by qualified personnel.
• Periodic inspections that must be performed as part of the operator's obligations, may be performed only by qualified
personnel (in Germany, see TRBS 1203).
• Always wear your personal protective equipment when performing maintenance and cleaning work.