Read file from receiver:
Read Electronic Noting file saved in receiver.
Clear all files in receiver:
Clear all Electronic Noting files saved in receiver.
About:
Click
“About”
to popup the information window of IQ E-Tablet, as follows
Exit:
Click
“Exit”
to quit IQ E-Tablet
6.1.2 Install signal receiver
Normally we use the Screen Companion (screen clamp of signal receiver) to fix the
receiver on the computer screen. There are two kinds of screen clamps. When your
screen frame is wide, you can use the big clamp to fix the receiver on the center of the
upper frame, or use the small clamp to fix the receiver on the center of the left or right
frame. When you have a small screen frame, you can use the small clamp to fix the
receiver on the center of the upper, left or right frame.
Installation of the screen clamp (big)
Step 1. Press the clamp on the back of the receiver down, insert the connector, loosen
the clamp, and then the signal receiver and the connector can be joined, as follows:
Prompt: Refer to “6.2.2 Electronic Noting” for detailed operation steps.
