4.1.5 Screen companion
Function
Fix the signal receiver on the
computer screen.
1. Screen clamp (small): Fix the signal receiver on
the top centre, left centre, or right centre of the
computer screen.
Note: this clamp suits a computer screen with
narrow frame.
2. Screen clamp (big): Fix the signal receiver on
the computer screen.
Note: this clamp suits a computer screen with wide
frame.
3. Connector: Connect the screen clamp and
signal receiver.
4.2 Installation and use of the digital pen
4.2.1 Install batteries:
open the battery chamber cover on the top of the digital pen,
and put 3 button cells (AG3) in. Make sure the cathode and anode are in the right
direction (as marked on the battery chamber), then close the cover.
Caution: When you want to replace the battery, just open the cover and take the batteries out, and
install the batteries according to the above steps. If the pen will not be used for extended batteries (eg.
School holidays), we recommend the removal of the batteries.
