24
USER MANUAL - 230 VAC MULTIFUNCTION CONTROL UNIT - 051D
REMOTE CONTROLS CONFIGURATION
This function is only available for the model WITH RADIO MODULE (APE-570/0510)
r5
DELETE ALL REMOTE CONTROLS
To delete all the remote controls, select the parameter
r5
.
After about 2 seconds, the control unit displays
n
. Hold down the (
+
) KEY. The display starts flashing showing
y
.
When the display shows
y
without flashing, then ALL previously stored remote controls have been DELETED.
r6 r7
PROGRAMMABLE FUNCTION
The remote controls stored via the functions
r6
and
r7
can be associated with different functions:
po
DEAD MAN OPENING,
pc
DEAD MAN CLOSING,
op
OPEN,
cL
CLOSE,
eL
ACTIVATE ELECTRIC LOCK for 3 seconds,
do
ACTI-
VATE PROGRAMMABLE OUTPUT (see parameters
o1
and
o2
in the section of the manual describing programmable outputs). To save a
remote control that can be associated with a programmable function, proceed as described in the STORE A REMOTE CONTROL paragraph.
To ASSOCIATE A NEW FUNCTION, select parameter
r6
or
r7
. Hold down the (
-
) KEY. The display starts flashing showing
r6
or
r7
.
When it stops flashing, release the (
-
) KEY. Change the function using the (
+
) KEY.
The function initially associated with
r6
is
po
DEAD MAN OPENING. The function initially associated with
r7
is
pC
DEAD MAN
CLOSING.
r9
PLUG-IN RADIO
The “PLUG-IN RADIO MODULE” section is dedicated to both models (APE-570/0510 - APE-570/0511).
To store or delete a remote control on the plug-in radio module, refer to the manual provided by the manufacturer of the RADIO.
It is possible to change the function engaged by the remote controls stored on the plug-in radio module. To change the function of the
radio, select parameter
r9
. After 2 seconds, the display shows the associated function. Use the (
+
) KEY or the (
-
) KEY to change the
function.
Remote controls stored on the plug-in radio module can be associated with one of these functions:
n
DISABLED,
go
START,
op
OPEN.
Remote controls stored on the plug-in radio module are not stored in the control unit memory.
