Abestorm OZ-G2000, Руководство пользователя

Страница: 4 / 13

Operation
Note: When "PERIOD" is not set, PERIOD does not light, at this time it is a single scheduled shutdown.
When the button "PERIOD" is set, it switches between 0, 12, and 24. 0 is invalid.12 hours means
that the cycle will run again according to the time set by CLOCK after 12 hours of shutdown, which
is equivalent to the cycle function.
Gears
The default gear for starting is 1 gear, and the fan and OZ-G2000 are 5 gears.
The fan has no thyristor speed regulation, the delay after detecting the zero crossing determines the
size of the gear.
Make sure that the equipment and connecting cables are not damaged.
Connect the power cable and connect the device to the power source. Observe the technical
parameters.
Place the Abestorm OZ-G2000 machine in the center of the room.
Set the timer to the required run time.
Then turn on the device. The display panel will light up. The cleaning cycle will begin immediately.
Once the preset time has passed, the Abestorm OZ-G2000 machine will automatically shut down.
1.
2.
3.
4.
5.
1.
2.
3.
1.
1.
2.
Generally, OZ-G2000 will automatically decompose into oxygen in about an hour. If a person stays
indoors for a long time, it is generally subject to not being able to smell the strong OZ-G2000 smell.
Overall Workflow
When performing odor neutralization and cleaning cycles, follow the steps below.
State Description of Switch
After pressing the "POWER" key to turn on the machine, the default state is the HOLD working
state. That is, it keeps running according to the set gear.
When setting the timing "CLOCK," a file of 30 minutes, cycle between 00:00 and 02:00, that is, set
the running time as the corresponding working time. When CLOCK is valid, HOLD is off, and
CLOCK is on.
The default power-on is the shutdown state. At this time, only the 4 borders shown in the figure
below are lit (the LCD backlight is turned off after the 30s of inactivity).
2