PASO 2
Empuje veinticuatro EXCÉNTRICOS ESCONDIDOS (1F)
dentro de los EXTREMOS (A y B), los FALDONES (M, N2 y O)
y las MOLDURAS (P y S).
PASO 4
Cuidadosamente vuelva los EXTREMOS (A y B) al revés.
Atornille ocho TORNILLOS NEGROS DE CABEZA PERDIDA
de 14 mm (32S) dentro de los EXTREMOS (A y B) hasta que el resalto
de los TORNILLOS repose sobre las superfi cies de los EXTREMOS.
Deslice las MOLDURAS DE EXTREMO (U) sobre los
EXTREMOS (A y B). Alinee las ranuras de las MOLDURAS
sobre las cabezas de los TORNILLOS de los EXTREMOS.
PASO 8
Precaución: Revise las partes cuidadosamente antes de
ensamblar. La separación de las piezas ya pegadas es muy difícil.
Primero, llene el agujero de la PATA (L) hasta 1/4 a 1/2 con
PEGAMENTO (54M).
Fije la PATA (L) al EXTREMO (B) y al FALDÓN LATERAL (O).
Apriete el EXCÉNTRICO ESCONDIDO y utilice cinco TORNILLOS
NEGROS DE CABEZA PERDIDA de 70 mm (100S).
NOTA: Asegúrese de que el PASADOR DE MADERA fi jado al
FALDÓN LATERAL se inserte dentro del agujero de la PATA. Quite
el exceso de PEGAMENTO.
PASO 7
Precaución: Revise las partes cuidadosamente antes de
ensamblar. La separación de las piezas ya pegadas es muy difícil.
Primero, llene los agujeros de la PATA (J) hasta 1/4 a 1/2 con
PEGAMENTO (54M). A continuación, inserte dos PASADORES DE
MADERA (15F) dentro de los agujeros. Quite el exceso
de PEGAMENTO.
Ahora, llene el agujero del EXTREMO (B) hasta 1/4 a 1/2 con
PEGAMENTO.
Fije el EXTREMO (B) a la PATA (J). Apriete cinco EXCÉNTRICOS
ESCONDIDOS. Quite el exceso de PEGAMENTO.
NOTA: Asegúrese de insertar el PASADOR DE MADERA sujetado
a la PATA en el agujero del EXTREMO.
Ahora, llene el agujero del FALDÓN LATERAL (O) hasta 1/4 a 1/2
con PEGAMENTO (54M).
Fije el FALDÓN LATERAL (O) a la PATA (J). Apriete el
EXCÉNTRICO ESCONDIDO. Quite el exceso de PEGAMENTO.
NOTA: Asegúrese de que el PASADOR DE MADERA sujetado a la
PATA se inserte dentro del agujero del FALDÓN LATERAL.
Finalmente, llene el agujero en el borde corto del FALDÓN
LATERAL (O). Inserte un PASADOR DE MADERA (15F) en el
agujero. Quite el exceso de PEGAMENTO.
PASO 6
Precaución: Revise las partes cuidadosamente antes de
ensamblar. La separación de las piezas ya pegadas es muy difícil.
Primero, llene los agujeros de la PATA (K) hasta 1/4 a 1/2 con
PEGAMENTO (54M).
Fije la PATA (K) al EXTREMO (A) y al FALDÓN LATERAL (O).
Apriete el EXCÉNTRICO ESCONDIDO y utilice cinco TORNILLOS
NEGROS DE CABEZA PERDIDA de 70 mm (100S).
NOTA: Asegúrese de que el PASADOR DE MADERA fi jado al
FALDÓN LATERAL se inserte dentro del agujero de la PATA. Quite
el exceso de PEGAMENTO.
PASO 5
Precaución: Revise las partes cuidadosamente antes de
ensamblar. La separación de las piezas ya pegadas es muy difícil.
Primero, llene los agujeros de la PATA (I) hasta 1/4 a 1/2 con
PEGAMENTO (54M). A continuación, inserte dos PASADORES DE
MADERA (15F) dentro de los agujeros. Quite el exceso
de PEGAMENTO.
Ahora, llene el agujero del EXTREMO (A) hasta 1/4 a 1/2
con PEGAMENTO.
Fije el EXTREMO (A) a la PATA (I). Apriete cinco EXCÉNTRICOS
ESCONDIDOS. Quite el exceso de PEGAMENTO.
NOTA: Asegúrese de insertar el PASADOR DE MADERA sujetado
a la PATA en el agujero del EXTREMO.
Ahora, llene el agujero del FALDÓN LATERAL (O) hasta 1/4 a 1/2
con PEGAMENTO (54M).
Fije el FALDÓN LATERAL (O) a la PATA (I). Apriete el
EXCÉNTRICO ESCONDIDO. Quite el exceso de PEGAMENTO.
NOTA: Asegúrese de que el PASADOR DE MADERA sujetado a la
PATA se inserte dentro del agujero del FALDÓN LATERAL.
Finalmente, llene el agujero en el borde corto del FALDÓN
LATERAL (O). Inserte un PASADOR DE MADERA (15F) en el
agujero. Quite el exceso de PEGAMENTO.
PASO 3
Atornille veinticuatro BIELAS DE EXCÉNTRICO (8F) dentro de
las PATAS (I, J, K y L).
NOTA: Asegúrese de utilizar los agujeros correspondientes
indicados en las PATAS como se muestra.
PASO 1
No apriete los SUJETADORES
en este paso.
Ensamble la unidad sobre un piso alfombrado o sobre el cartón
vacío para evitar rayar la unidad o el piso.
Para comenzar el ensamblaje, empuje diez SUJETADORES
(10F) dentro de los agujeros grandes de
los EXTREMOS (A y B), del PARAL (C) y del FONDO (E2).
Page 30