Page 19
Hey! It's starting to look
like something!
Step 15
å
Carefully turn your unit over onto its front edges.
å
Unfold the BACK (F2) and lay it over your unit.
å
Make equal margins along the two short edges and along the two long
edges of the BACK (F2). Push on opposite corners of your unit if needed
to make it "square".
å
Fasten the BACK (F2) to your unit using the NAILS (1N).
å
NOTE: Be sure to tap NAILS into the holes that line up over
the UPRIGHT (C).
å
NOTE: Perforations have been provided for access through the BACK.
Carefully cut out the holes needed.
NAIL
(59 used in this step)
1N
F2
Unfi
nished sur
face
These holes must line up
over the UPRIGHT (C).
Do not stand the unit upright without the
BACK fastened. The unit may collapse.
Caution
Printed information
must be facing up
.