manualshive.com logo in svg
background image

9.2 Burner cleaning

   

Clean the burner (Part No. 16 on the list 
of parts) on a daily basis. Make sure that 
the air intakes are always clean. The 
burner may be easily cleaned inside the 
stove. The burner holder (Part No. 15 on 
the list of parts) shall be vacuum cleaned. 
If the stove operates non- stop, the stove
shall be turned off at least twice every 24 
hours.

Figure No

. 1

9.3 Glass cleaning

The stove is designed so that in any mode it brings air to zone in front 
of glass, thus making an “air curtain” that prevents accumulation of
combustion products on glass.

Glass is best cleaned with a wet cloth without applying chemical 
agents containing corrosive acids given the fact that there is a risk of 
damaging glass surface.

9.4 Firebox cleaning

The flue ducts located on the left and right side of the firebox shall be
cleaned twice a year or after having spent about 700 kg of pellets.

 

The firebox shall be cleaned in the following manner:

1.

 Remove the stove cover and front cover (unscrew the two screws on

    the left and right side of the cover)

2.

 Disassemble the temperature probe in the firebox.

3.

 When the probe is removed lift the iron cast part (Part No.13 on the list 

    of parts)

4.

 Clean the left and right side of due flue ducts by using a steel brush.

5.

 Put all the pieces into place in reverse order making sure that all

    components are well secured and in place

13

Содержание 9kW LILLY




















Отзывы: