background image

WELCOME to the HERGÓM family.

Thank you for choosing our built in CAST IRON STOVE.

All its pieces are manufactured in cast iron which guarante -

es that it will serve you for many, many years.  All our stoves are

manufactured in special boiler plate.

We are sure that your new CAST IRON STOVE will be enti -

rely to your satisfaction.

To possess a HERGOM STOVE shows an eye for excep -

tional quality.

Please, read all the manual.  Its aim is to make you familiar

with your STOVE giving guidelines for its installation, operation

and maintenance which will be very useful.  Keep it and refer to

it when necessary.

If after reading this manual you need any further clarification

please contact your normal supplier or call the factory directly.

INDUSTRIAS HERGÓM, S.A., does not take any responsibility whatsoever for the dama-

ges caused by or resulting from alterations to its products that have not been authorised in wri-
ting or for defective installations.

Furthermore, it reserves the right to modify its finished products without prior war-

ning.

Industrias Hergom, S.A., with registered offices in Soto de la Marina - Cantabria Spain, of-

fers a TWO-YEAR warranty for all its products.

The geographical coverage for this warranty only includes the countries in which Industrias

Hergóm, S.A. has a subsidiary company or an official importer that carry out the distribution of
its products and where the Community Directive 1999/44/EC is obligatory.

The warranty will come into force as from the date of the purchase of the product stated on

the warranty card and only covers the damages or breakages due to manufacturing defects or
faults.

I  M  P  O  R  T  A  N  T

13

Summary of Contents for Compact C-4










Reviews: