Abbott St. Jude Medical Patient Controller 3875, Руководство пользователя, Страница: 51 / 108

45
3. Tap the MRI Mode toggle button.
4. When the "Set Generator to MRI Mode" message
appears, tap Continue. Stimulation stops, and the
patient controller app checks the system for any
issues. If the checks are successful, the "Proceed
with MRI" message appears and the MRI mode is
on.
NOTE: If a warning screen appears instead of
the "Proceed with MRI" message, you cannot
set the IPG to MRI mode and cannot receive
an MRI scan. Refer to “Troubleshooting”
(page 63) for more information.
5. Tap OK.
Disabling the MRI Mode
After your procedure, you need to disable the MRI
mode to restart stimulation. To disable the MRI mode,
follow these steps:
1.
Launch the patient controller app and connect
with your generator. You should see the following
screen, showing that the IPG is in MRI mode.