Abbott i-STAT Alinity Скачать руководство пользователя страница 86

Страница: 86 / 296

Specifications

i-STAT Alinity Rechargeable Battery Specifications

Dimensions: Height x Width x Depth

2.7 in (6.9 cm) x 3.6 in (9.1 cm) x 1.9 in (4.8 cm)

Weight

0.4 lb (180 g)

Electrical rating

3.65 VDC 19.3 Wh (nominal)

Operational range: Temperature and humidity 10 to 40ºC (50 to 104ºF)

10 to 90% non-condensing relative humidity, with

maximum saturation temperature of 34ºC (93.2ºF)

Storage range: Temperature and humidity

-10 to 60ºC (14 to 140ºF)

10 to 90% non-condensing, with maximum saturation

temperature of 50ºC (122ºF)

Altitude

up to 3,048 meters (10,000 feet)

Precautions and Limitations

Batteries have been designed to provide a safe, high-capacity power source in a relatively small

lightweight package. However, if misused or abused, these batteries can be dangerous. Follow these

guidelines for the safe handling, use and disposal of the rechargeable batteries.

DO:

•

refer to the Getting Started Guide for proper charging instructions.

•

charge a new rechargeable battery pack for 4 hours before initial use. A fully discharged battery will

be 100% charged and ready for use after 4 hours.

•

use only a rechargeable battery pack purchased from Abbott Point of Care.

•

use only the accessories and consumables specified or supplied for this system by Abbott Point of

Care.

•

keep a spare, charged battery on hand at all times.

•

store charged battery in the original packaging.

•

check with authorities for local, state, and/or national requirements for disposal or recycling

requirements for Lithium-Ion batteries.

DO NOT:

•

dismantle, open or shred the battery.

•

expose the battery to heat or fire. Avoid storage in direct sunlight.

•

short circuit the battery. Do not store batteries in such a manner that they may short circuit each

other, or allow metal objects to touch the battery contacts.

•

subject the batteries to mechanical shock.

•

open, disassemble, modify, crush, burn, shred, or expose to high temperatures. Toxic gases and

liquids are present in batteries.

•

place the battery in an oxygen-enriched atmosphere.

•

make any unauthorized repairs or modifications to this product as this may cause personal injury or

damage to the unit.

i-STAT Alinity — System Operations Manual

Art: 745529-01 Rev. G

Rev. Date: 04-Mar-2021

Содержание i-STAT Alinity









































































































































































































































































































Результаты поиска

Содержание i-STAT Alinity

Отзывы:

Бренды по названию

Популярные бренды

Abbott i-STAT Alinity, Руководство по эксплуатации

Результаты поиска

Содержание i-STAT Alinity

Отзывы:

Бренды по названию

Популярные бренды