Abbott i-STAT Alinity Скачать руководство пользователя страница 22

Страница: 22 / 296

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant

to Part 15 of the Federal Communications Commission (FCC) Rules. These limits are designed to provide

reasonable protection against harmful interference when the equipment is operated in a commercial

environment.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in

accordance with the operator’s manual, can cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful interference in which case you

will be required to correct the interference, at your own expense.

Changes or modifications not expressly approved by the manufacturer could void your authority to

operate the equipment.

Canadian Department of Communications Industry Canada Notice

(Canada only)

This Class A digital apparatus complies with Canadian ICES-001.

FCC Part 15 / Industry Canada Information:

This device complies with Part 15 Subpart C and Subpart E of FCC Rules and Industry Canada licence-

exempt RSS-210 standard(s). Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and
(2) This device must accept any interference, including interference that may cause undesired

operation of this device.

This product contains transmitter module:

FCC ID: 2AAEX-SDABGN
IC: 7228C-SDABGN

SAR / RF Exposure Notice:

This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment

and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET-65 and RSS-102 of

the IC (Industry Canada) radio frequency (RF) Exposure rules.

Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type

and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio

interference to other users, the antenna type and its gain should be so chosen that the equivalent

isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication.

This radio transmitter (identify the device by certification number, or model number if Category II) has

been approved by Industry Canada to operate with the antenna types listed below with the maximum

permissible gain and required antenna impedance for each antenna type indicated. Antenna types not

included in this list, having a gain greater than the maximum gain indicated for that type, are strictly

prohibited for use with this device.

For product available in the USA/Canada market, only channels 1-11 can be operated. Selection of other

channels is not possible.

If this device is to be operated in the 5.15~5.25GHz frequency range, it is restricted to indoor

environments only.

xxii

i-STAT Alinity — System Operations Manual

Art: 746983-01 Rev. H

Rev. Date: 11-Nov-2020

Содержание i-STAT Alinity









































































































































































































































































































Результаты поиска

Содержание i-STAT Alinity

Отзывы:

Бренды по названию

Популярные бренды

Abbott i-STAT Alinity, Руководство по эксплуатации

Результаты поиска

Содержание i-STAT Alinity

Отзывы:

Бренды по названию

Популярные бренды