Starting Your Sensor
Step
Action
1
Press the Home Button to turn on the Reader .
2
Touch Start New Sensor .
3
Hold the Reader within 4 cm (1 .5 inches) of the
Sensor to scan it . This starts your Sensor . If sounds
are turned on, the Reader beeps when the Sensor
has been successfully activated . The Sensor can
be used to check your glucose after 60 minutes .
Note: If the Sensor is not successfully scanned
within 15 seconds, the Reader displays a prompt
to scan the Sensor again . Touch OK to return to
the Home Screen, and touch Start New Sensor
to scan your Sensor .
No Active Sensor
22:23
Start New
Sensor
Review
History
minutes
OK
New Sensor
Starting Up
60
Sensor can be used in:
22