Warning: Risk of electrical shock
Fixture(s) should be used
"ONLY"
with
low voltage landscape power units
that do not exceed 25A, 15V.
1. Please ensure the light cable wires
input are 12v ac/dc.
2. Turn off power before installation.
3. Unscrew the screws and remove the
faceplate, clamp spring and lens from
the housing.
4. Place the lamp with the correct
wattage.
5. Use wirenuts
WN12(sold separately)
to connect the wires to the main cable
connector.
6. Turn on the power.
CAUTION:
Fixture(s) must be installed in accordance with all local codes and ordinances.
INSTALLATION INSTRUCTION
www.ABBALightingUSA.com
Install all fixtures 10 feet (3.05M) or more from pool, spa or fountain.
This fixture is intended to be used only with a transformer rated
maximum 0f 300 watts (25 AMPS) at 15 volts.
Wiring connections must be made with UL listed wire connectors that
are suitable for outdoor use.
DIAMETER: 5.4”
6.7”
