Room&Board CLARKSON Assembly Instructions Download

Page: 1 / 4

CLARKSON FLOOR LAMP

Keep these instructions for future use

CAUTION:

- It is strongly recommended that installation of this product is done by two
people.

-READ these instructions entirely prior to installation.

-Assembly of this lamp requires minor lifting. Improper handling of heavy
components could result in damage to the product.

THIS PRODUCT INCLUDES:

A. - Lamp shade
B. - Clarkson base assembly
C. - 3/16” Allen wrench
D. - Dimmable LED bulb

(not to scale)

ASSEMBLY INSTRUCTIONS

Summary of Contents for CLARKSON

Page 1: ...e by two people READ these instructions entirely prior to installation Assembly of this lamp requires minor lifting Improper handling of heavy components could result in damage to the product THIS PRO...

Page 2: ...used to connect the two arms Carefully tuck any excess wire into the upper arm while sliding it onto the pivoting post at the connection point Then fasten the arms together using those screws Now you...

Page 3: ...ile simultaneously tightening the threaded shade ring to the socket from below Screw in the light bulb To adjust the pressure of the hinge connecting the base to the lower arm use the included 3 16 Al...

Page 4: ...cluded 3 16 Allen wrench to tighten or loosen the internal set screw The upper arm should be loose enough to move freely when the lamp s position is adjusted yet tight enough to maintain the position...

Brands by name