14
washer on Bolt. Screw Nut onto end of Bolt, finger tight. Repeat for second
mounting Bolt. Tighten both Nuts.
2)
Repeat for all additional Modules.
3)
Straddle mounting pipe with U-Bolt and insert threaded ends through holes
located in Bracket, so that Bracket back fits flat against pipe and Module
Mounting Lip sets away from pipe (see Figure 19).
4)
Place the split washer, then a flat washer on end of U-Bolt. Screw Nut onto
end of Bolt, finger tight.
5)
Repeat Step 4 for other side of U-Bolt.
6)
Move bracket into position underneath NGC, being careful to allow clearance
for Sample Conditioning Module(s).
7)
Using a socket wrench, tighten both Nuts.
2102023-001
2102023-002
2102024-001
2102024-002
Figure 18 Sample Conditioning Module Bracket
2" Pipe
U-Bolt
VIEW A-A
A
A
A
A
B
B
VIEW B-B
SINGLE MODULE BRACKET
MULTIPLE MODULE BRACKET
2 EA. 5/16-18 SST LOCKING HEX NUT
2 EA. 5/16" SST FLAT WASHER
2 EA. 5/16" SST SPLIT LOCK WASHER
Figure 19 Sample System Mounting Kits
