ABB Terra AC Скачать руководство пользователя страница 30 | Manualshive

Страница: 30 / 54

ABB Terra AC Скачать руководство пользователя страница 30

3.3

Personal protective equipment

Symbol

Description
Protective clothing

Safety gloves

Safety shoes

Safety glasses

3.4

FCC compliance statement

Caution: Changes or modifications not expressly approved by the party

responsible for compliance could void the user's authority to operate the

equipment.

Note: This equipment has been tested and found to comply with the

limits for a Class B digital device, pursuant to part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment

generates, uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If

this equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and on,

the user is encouraged to try to correct the interference by one or more

of the following measures:
•

Reorient or relocate the receiving antenna.

•

Increase the separation between the equipment and receiver.

•

Connect the equipment into an outlet on a circuit different from that

to which the receiver is connected.

•

Consult the dealer or an experienced radio/TV technician for help.

3.5

Industry Canada compliance statement

This device contains licence-exempt transmitter(s)/receiver(s) that comply with

Innovation, Science and Economic Development Canada’s licence-exempt RSS(s).

Operation is subject to the following two conditions:

Safety

30

BCM.V3Y00.0-EN | 002

«
...
28
29
30
31
32
...
»

Содержание Terra AC























































Отзывы:

Нет отзывов