ABB Terra 360 CE Скачать руководство пользователя страница 56

Страница: 56 / 134

Procedure

1. Do a check on the transport sensors.

2. Remove the packaging material. To discard the packaging material, refer to

section

2.12

3. Make sure that all parts are delivered according to the order. Refer to the order

and section

10.3

4. If you find damage or the parts are not according to the order, contact the local

representative of the manufacturer.

4.2.2

Do a check of the transport sensors

Preliminary requirements

•

Installation engineer

Procedure

1. Do a check on the sensors (A) that

record the shocks during transport.

2. Do a check on the sensors (B)

that record the maximum tilt during

transport.

3. If the sensors (A) show a red

indication or the sensors (B) show a

tilt that is too high, do these steps:
For the transport specifications, refer

to section

10.4

a. Refuse the delivery of the EVSE.
b. Make a note on the delivery

receipt.

c. Within three days of the delivery,

ask the transport company for an inspection.

d. If you see damage on the cabinet, through the packaging material, do not

unpack the EVSE.

e. Contact the manufacturer and give details of the delivery problems.

TiltWatch PLUS

ShockDot

WARNING

ShockDot

WARNING

Transport, handling and unpacking

9AKK108467A6398-EN | 002

Содержание Terra 360 CE






































































































































Результаты поиска

Содержание Terra 360 CE

Отзывы:

Бренды по названию

Популярные бренды

ABB Terra 360 CE, Руководство по эксплуатации и установке

Результаты поиска

Содержание Terra 360 CE

Отзывы:

Бренды по названию

Популярные бренды